Rus
 
     
 
System controllers
Remote control interface

RF Test System Controllers

The AR SC1000 Systems Controller Makes Accuarcy Easy

SC1000 The SC1000s are versatile RF test system controllers (signal routing switch matrices) that coordinate multiple pieces of equipment in a single test set-up. This alleviates the need to change cable feeds due to frequency limitations of individual pieces. The SC1000s can be used as RF switch matrices and can also be controlled by SW888A and SW1006 software. Designed for the use of up to three signal generators, four power amplifiers, four directional couplers, four different RF loads, and a spectrum analyzer or receiver for broadband RF testing, the SC system controllers operate in a frequency range from dc to 40 GHz via RS-232, IEEE-488 and/or by manual control via the front panel.

System interlock capability is provided by sensing a switch closure. Additionally, a switchable positive 12 VDC signal and four open collector outputs are supplied to allow the use of external switches. Alternative applications include the use of the system controller to switch in various RF filters for reducing harmonic distortion.

For more information on system controllers, please refer to Application Note #48

 
model description
SC1000 Controller designed for multi-ampilifier/multi-load applications where reverse power measurement is not neccessary
SC1000M1 Controller designed for multi-amplifier/multi-load applications with forward and reverse power measurement and emissions feedback
SC1000M2 Controller accommodates forward power measurements and higher power/high frequency amplifier and load combinations where switching and cable losses need to be minimized
SC1000M3 Controller accommodates forward and reverse power measurement and higher power/higher frequency amplifier and load combinations where switching and cable losses need to be minimized (Other variation of controllers without switches or with lower priced switches are available - Contact factory)
SC1000M4 Controller accomodates forward and reverse power measurement and higher power/higher frequency (up to 40 GHz) amplifier and load combinations where switching and cable losses need to be minimized.
 
 
 

Found A Mistake?

Radiant Group of Companies 1997-2020 | Electronic Components | Site Map |    
Rambler's Top100